How to Change the Battery in Your Nissan Key Fobs
Nissan key fobs let motorists to lock and unlock their cars from an extended distance, as being able to start them when needed. Our certified technicians and experts in parts can assist you if need to purchase a new Nissan smart key or have issues with your current key.
Keyless Entry
Keyless entry is a fantastic feature that lets you lock and unlock your Nissan vehicle with the press of the button. This system allows you to start your vehicle without the need to insert a key into the ignition. However, the system relies on a battery in order to function. If the battery dies, it can leave you not able to use your key fob. It could even lock you out of your vehicle. You must learn how to replace the battery on your Nissan's key fob as quickly as possible.
To begin, turn off your vehicle and open the door in which you have the key fob. Then, flip over the key fob and look for a small release latch. Once you've pressed this release latch, you can begin to take off the cover of the fob. It will be apparent that the key fob is equipped with several wires. They are used for communication with the computer onboard of your vehicle. You should be able to identify the wires that you require and follow the steps in your owner's manual make the necessary connections. After you've made the connection, you are able to connect the key fob together.
It might seem difficult to change the battery in your keyfob, however it's not as difficult as you think. By following these simple steps, you can complete this task in a matter of minutes.
Remote Start
Your key fob can do so much more than just lock your car doors. It can also remotely start your car, roll down the window, enable multiple drivers profiles, and a lot more. It's important that you know how to make use of the device and replace the battery when needed.
Our Service Center may be able to upgrade your Nissan in the event that it doesn't come with remote start. This will allow you to start your car from a distance, and avoid cold winter mornings. You can even install an app for your smartphone for more convenience.
To use the remote start on your Nissan, make sure that your Smart Key is within range. You should also ensure that your car's engine is turned off and that your key isn't in the ignition. When you're ready to go, press and hold your fob's keychain button. The car's hazard lights should flash to indicate that the key fob is successfully programmed.
If your key fob isn't linked to your Nissan try retracing the steps. You'll want to make sure that your key fob didn't get lost in the process. Find a friend whom you trust to help you locate it if you are unable to locate it. They may be able find it in a dark, unexpected place, such as cracks in the couch cushions or under the counter.
Lockout Protection
If you ever put your key fob in your car it is possible that the Intelligent Key system in some models will prevent it from locking your car or trunk. It uses a technology called location recognition to determine if the Intelligent Key is in the trunk or the cabin. If the key is detected, you'll hear an audible alarm and feel a thump on your fob to inform you that you've accidentally left it inside your vehicle.
If your key-fob starts responding all of a sudden, make sure to determine whether it is being blocked by something that might hinder its signal. Check to see if any wireless devices are located within a few feet from the key fob. Wireless security systems, like can interfere with key fob signals and cause your key fob to stop functioning.
You could try using an iron coat hanger made of wire or a different, long tool that you can slip under the trunk or door to get the key fob out of the car. It might take a few tries to unlock the key fob.
Test your Intelligent Key Fob with the doors shut. Press the buttons on your Nissan Intelligent Key fob as you stand a few steps away. If the lights flash and the horn beeps, you're successfully programming your Intelligent Key fob. If not, you should call Speck Nissan and speak to an employee of our team.
Remote Lockout
It's not unusual for car remotes to stop functioning due to one or the other reason. Fortunately, the majority of the times, it's an issue with the battery that you can replace it yourself. You can reset the system by pressing the lock or unlock button repeatedly. Depending on the vehicle you have you might hear a sound when you've successfully reset the system. Some automakers have a customer service which you can call to get help (such as GM's OnStar, Mercedes-Benz Mbrace or Hyundai Blue Link).
Nissan Intelligent Key Fobs have some clever features that will help you avoid being locked out. Sensors in your car will be able to tell that the fob is in your car's cabin or trunk. extra resources will then send a vibration and an audio alert to your fob in order to let you are aware that you have left it in the car.
Some models come with a real key blade which you can use if the battery of your fob dies or something else goes wrong. On the Rogue for instance you can access the hidden key by flipping the release tab on the back of your fob. You must be within the range of the sensor on your Nissan vehicle for this to be effective. This method is more difficult than turning on the key to the car, but it can save you a lot of time and headache.